Claims ledger · 164 claims · C-X2-001 – C-X2b-037
Civil airworthiness
What each source says, where, its evidence status, its quote where one was read, and the audit state. All lanes and a search over every claim.
Evidence
164 claims
| Claim | Variant | What the source says | Source | Evidence | Origins | Audit |
|---|---|---|---|---|---|---|
C-X2-001 | family | With the supplementary serial-pattern search of the same 2 Oct 2026 database, the FAA civil register held at least 211 North American Mustangs: the 209 rows under North American P-51/F-51/A-36/XP-51/TF-51D, Cavalier F51D and CAC CA-18 model codes (C-R2-001) plus N5087F (42-106638) and N51BE (104-25404) under other manufacturer names; 208 of the 211 held a valid registration (status V). The figure is a floor: the pattern search found no further Mustang, but covered only AAF-, North American c/n- and RAAF-form serials.(5 of 2471 serial-pattern rows; the other 2466 are other types)registry/faa-releasable-2026-10-02-supplement.txt | FAA Releasable Aircraft Database (MASTER, ACFTREF, DEREG), supplementary searchsupplement section 3; MASTER counts recomputed by logs/V2-recount.py · database files dated 2026-10-02 (searched again 2026-10-03) · accessed 2026-10-03 | ●Primary sourceSingle source headline | FAA registry MASTER/DEREG files | pending |
C-X2-002 | not established | A direct search of the full MASTER file (2 Oct 2026) found no row for N51BS, N51CK, N51U, N51YZ, N51ZW, N5478V or N722WR - the seven N-numbers the site shows as current registrations of survivors.MASTER rows for N-numbers the site shows but the first extract did not hold: 51BS 51CK 51U 51YZ 51ZW 5478V 722WR (0 rows)registry/faa-releasable-2026-10-02-supplement.txt | FAA Releasable Aircraft Database (MASTER, ACFTREF, DEREG), supplementary searchsupplement section 1 · database files dated 2026-10-02 (searched again 2026-10-03) · accessed 2026-10-03 | ●Primary source | FAA registry MASTER/DEREG files | pending |
C-X2-003 | not established | The FAA deregistered-aircraft file (DEREG, 2 Oct 2026 database) records N51BS with serial '44-73822', cancelled 6 May 2025; N51BS has no current MASTER row.51BS,44-73822,6402304,V,1958,2,20250506,20230401,20171107,19580625,registry/faa-releasable-2026-10-02-supplement.txt | FAA Releasable Aircraft Database (MASTER, ACFTREF, DEREG), supplementary searchsupplement section 2 (DEREG rows) · database files dated 2026-10-02 (searched again 2026-10-03) · accessed 2026-10-03 | ●Primary source | FAA registry MASTER/DEREG files | pending |
C-X2-004 | not established | The FAA deregistered-aircraft file (DEREG, 2 Oct 2026 database) records N51CK with serial '44-64005', cancelled 27 Mar 2018; N51CK has no current MASTER row.51CK,44-64005,6402309,29,1960,2,20180327,20140514,20070505,19630322,DEregistry/faa-releasable-2026-10-02-supplement.txt | FAA Releasable Aircraft Database (MASTER, ACFTREF, DEREG), supplementary searchsupplement section 2 (DEREG rows) · database files dated 2026-10-02 (searched again 2026-10-03) · accessed 2026-10-03 | ●Primary source | FAA registry MASTER/DEREG files | pending |
C-X2-005 | not established | The FAA deregistered-aircraft file (DEREG, 2 Oct 2026 database) records N51U with serial '44-74204N', cancelled 31 Oct 2013; N51U has no current MASTER row.51U,44-74204N,6402319,16,,,20131031,20020416,19930325,,CAregistry/faa-releasable-2026-10-02-supplement.txt | FAA Releasable Aircraft Database (MASTER, ACFTREF, DEREG), supplementary searchsupplement section 2 (DEREG rows) · database files dated 2026-10-02 (searched again 2026-10-03) · accessed 2026-10-03 | ●Primary source | FAA registry MASTER/DEREG files | pending |
C-X2-006 | not established | The FAA deregistered-aircraft file (DEREG, 2 Oct 2026 database) records N51YZ with serial '44-84900', cancelled 5 Feb 2022; N51YZ has no current MASTER row.51YZ,44-84900,6402319,29,1945,434,20220205,20180924,19951127,19980707,NVregistry/faa-releasable-2026-10-02-supplement.txt | FAA Releasable Aircraft Database (MASTER, ACFTREF, DEREG), supplementary searchsupplement section 2 (DEREG rows) · database files dated 2026-10-02 (searched again 2026-10-03) · accessed 2026-10-03 | ●Primary source | FAA registry MASTER/DEREG files | pending |
C-X2-007 | not established | The FAA deregistered-aircraft file (DEREG, 2 Oct 2026 database) records N51ZW with serial '44-13903JP', cancelled 20 Mar 2025; N51ZW has no current MASTER row.51ZW,44-13903JP,1690478,V,1944,2,20250320,20231007,20200224,19930614,NMregistry/faa-releasable-2026-10-02-supplement.txt | FAA Releasable Aircraft Database (MASTER, ACFTREF, DEREG), supplementary searchsupplement section 2 (DEREG rows) · database files dated 2026-10-02 (searched again 2026-10-03) · accessed 2026-10-03 | ●Primary source | FAA registry MASTER/DEREG files | pending |
C-X2-008 | not established | The FAA deregistered-aircraft file (DEREG, 2 Oct 2026 database) records N5478V with serial '4473574', cancelled 26 Jun 1970; N5478V has no current MASTER row.5478V,4473574,6402309,V,,,19700626,,19670209,,PAregistry/faa-releasable-2026-10-02-supplement.txt | FAA Releasable Aircraft Database (MASTER, ACFTREF, DEREG), supplementary searchsupplement section 2 (DEREG rows) · database files dated 2026-10-02 (searched again 2026-10-03) · accessed 2026-10-03 | ●Primary source | FAA registry MASTER/DEREG files | pending |
C-X2-009 | not established | The FAA deregistered-aircraft file (DEREG, 2 Oct 2026 database) records N722WR with serial '44-72254', cancelled 19 May 2015; N722WR has no current MASTER row.722WR,44-72254,05627Z2,18,,,20150519,20140415,,,LAregistry/faa-releasable-2026-10-02-supplement.txt | FAA Releasable Aircraft Database (MASTER, ACFTREF, DEREG), supplementary searchsupplement section 2 (DEREG rows) · database files dated 2026-10-02 (searched again 2026-10-03) · accessed 2026-10-03 | ●Primary source | FAA registry MASTER/DEREG files | pending |
C-X2-010 | family | V-1650-3 takeoff limit (five minutes, sea level): 60 in. Hg, 3000 rpm (1380 hp).(Sea level) 60 in. Hg., 3000 rpm (1380 hp)drs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.1 Engine Limits · November 18, 2009 · accessed 2026-10-03 | ●Primary sourceSingle source headline | FAA LTC-11 (Rev 5, 18 Nov 2009 - current; Rev 4 2007 and Spec L-11-3 are earlier revisions of the same document = one origin) | pending |
C-X2-011 | family | V-1650-7 maximum continuous: low blower (11,300 ft) 46 in. Hg, 2700 rpm (1180 hp); high blower (23,400 ft) 46 in. Hg, 2700 rpm (1065 hp).(11,300 ft.) 46 in. Hg., 2700 rpm (1180 hp)drs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.1 Engine Limits · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-012 | family | V-1650-3 maximum continuous: low blower (17,400 ft) 46 in. Hg, 2700 rpm (1110 hp); high blower (29,500 ft) 46 in. Hg, 2700 rpm (950 hp).(17,400 ft.) 46 in. Hg., 2700 rpm (1110 hp)drs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.1 Engine Limits · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-013 | ltc11-p-51d | P-51C and P-51D propeller: Hamilton Standard 24D50 hubs, diameter 11 ft 2 in.P-51C, and P-51D, Diameter 11’2”, Governor 4G10, Hamilton Standarddrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.1 Propeller and Propeller limits · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009); LTC-11 Rev 4 (FAA, 15 Oct 2007) | pending |
C-X2-014 | family | Propeller governor model: Rev 4 (and the Rev 3 OCR) print "Governor 4010"; Rev 5 prints "Governor 4G10".Diameter 11’2”, Governor 4010, Hamilton Standard 24D50 hubsdrs/LTC-11-Rev4-verbatim.txt | Type Certificate Data Sheet No. 11 (LTC-11), Revision 4p.1 Propeller · October 15, 2007 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 4 (FAA, 15 Oct 2007); LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-015 | family | Rev 5 blade list (V-1650-7 and V-1650-3): J6523A-24, J6487A-24, K6523A-24, J6487A-24 (listed twice), 6547A-6; stop settings at the 42-in. station low 23.2 deg, high 65.2 deg (ditto marks).J6523A-24 23.2 degrees 65.2 degreesdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5pp.1-2 Propeller limits · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-016 | family | Rev 4 gives a second J6487A-24 row with stop settings 24.2 deg low / 55.2 deg high (the Rev 3 OCR shows the same row, read as "J6887A-24").J6487A-24 24.2 degrees 55.2 degreesdrs/LTC-11-Rev4-verbatim.txt | Type Certificate Data Sheet No. 11 (LTC-11), Revision 4p.1 Propeller limits · October 15, 2007 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 4 (FAA, 15 Oct 2007); Spec L-11-3 (LTC-11 Rev 3, 1947 approval) | pending |
C-X2-017 | ltc11-p-51k | P-51K propeller: Aeroproducts A-542A-1, blade number A20-156-24M, diameter 11 ft 0 in.P-51K, Diameter 11’0”, Aeroproducts A-542A-1, blade number A20-156-24Mdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.2 Propeller · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009); LTC-11 Rev 4 (FAA, 15 Oct 2007) | pending |
C-X2-018 | ltc11-p-51k | P-51K Aeroproducts stop settings at 42-in. station: V-1650-7 low 22.8 / high 57.8 deg; V-1650-3 low 21.0 / high 56.0 deg.V-1650-7 22.8 degrees 57.8 degreesdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.2 Propeller · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-019 | family | Maximum glide or dive speed 505 mph from 0 to 10,000 ft; 325 mph from 20,000 to 30,000 ft; level flight or climb 325 mph.0 to 10,000 505 mphdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.2 Airspeed limits · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009); LTC-11 Rev 4 (FAA, 15 Oct 2007) | pending |
C-X2-020 | family | Maximum glide or dive speed 10,000 to 20,000 ft: 400 mph.10,000 to 20,000 400 mphdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.2 Airspeed limits · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009); LTC-11 Rev 4 (FAA, 15 Oct 2007) | pending |
C-X2-021 | family | C.G. range: 21 percent to 31 percent MAC, gear down (retraction has negligible effect). Datum 139 in. forward of jig point; MAC 79.6 in., L.E. MAC 119.1 in.21 percent to 31 percent MAC gear down.drs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.2 C.G. Range · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009); Spec L-11-3 (LTC-11 Rev 3, 1947 approval) | pending |
C-X2-022 | family | Maximum weight: 10,500 lb.Maximum weight 10,500 lbs.drs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.2 Maximum weight · November 18, 2009 · accessed 2026-10-03 | ●Primary sourceSingle source headline | FAA LTC-11 (Rev 5, 18 Nov 2009 - current; Rev 4 2007 and Spec L-11-3 are earlier revisions of the same document = one origin) | pending |
C-X2-023 | family | Minimum crew one pilot; number of seats one; maximum baggage none.Number of seats Onedrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.2 · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009); LTC-11 Rev 4 (FAA, 15 Oct 2007) | pending |
C-X2-024 | family | Fuel capacity: two wing tanks 92 U.S. gal at 163.0 in. aft of datum; aft fuselage tank 65 U.S. gal at 210.0 in.Forward two wing tanks, 92 U.S. gal., 163.0 inches aft of datumdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.2 Fuel capacity · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009); LTC-11 Rev 4 (FAA, 15 Oct 2007) | pending |
C-X2-025 | family | Oil: tank 12.5 U.S. gal at 116.0 in. aft of datum; total oil system 21.2 U.S. gal.Oil tank capacity 12.5 U.S. gal., 116.0 inches aft of datumdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.2 Oil capacity · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-026 | family | Coolant (Rev 5): engine system 16.7 U.S. gal, aftercooler system 4.8 U.S. gal, total 21.5 U.S. gal at 124.0 in. aft of datum.Total Coolant System capacity 21.5 U.S .gal., 124.0 Inches aft of datumdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.2 Coolant Capacity · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-027 | family | Coolant (Rev 4): 5.2 gal at 40.0 in. aft of datum.5.2 gal, 40.0 inches aft of datumdrs/LTC-11-Rev4-verbatim.txt | Type Certificate Data Sheet No. 11 (LTC-11), Revision 4p.2 Coolant Capacity · October 15, 2007 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 4 (FAA, 15 Oct 2007) | pending |
C-X2-028 | family | Maximum operating altitude: 41,900 ft.Maximum Operating Altitude 41,900 feetdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.2 · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009); LTC-11 Rev 4 (FAA, 15 Oct 2007) | pending |
C-X2-029 | family | Other operating limitations: P-51C per Army T.O. AN-01-60JD-1; P-51D and P-51K per Army T.O. AN-01-60JE.P-51C, Army T.O. AN-01-60JD-1drs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5pp.2-3 Other operating limitations · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009); Spec L-11-3 (LTC-11 Rev 3, 1947 approval) | pending |
C-X2-030 | family | Serial numbers eligible: all original block serial numbers of P-51C, P-51D (USAF F-51D) and P-51K (USAF F-51K).All original block serial numbers P-51C, P-51D (USAF F-51D), P-51K (USAF F-51K)drs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.3 Serial numbers Eligible · November 18, 2009 · accessed 2026-10-03 | ●Primary sourceSingle source headline | FAA LTC-11 (Rev 5, 18 Nov 2009 - current; Rev 4 2007 and Spec L-11-3 are earlier revisions of the same document = one origin) | pending |
C-X2-031 | ltc11-p-51c | One P-51B is eligible: P-51B-1-NA serial 43-12252, on a finding of identicality with the P-51C-1 (Note 6).P-51B-1-NA serial number 43-12252 (see note 6)drs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.3 Serial numbers Eligible; Note 6 · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009); LTC-11 Rev 4 (FAA, 15 Oct 2007) | pending |
C-X2-032 | ltc11-p-51c | Note 6 (Rev 5): all information on the sheet for the P-51C model is applicable to the P-51B model.All information on this TCDS for the P-51C model is applicable to the P-51B modeldrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.4 Note 6 · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-033 | family | Production basis (Rev 5): Production Certificate 724NM; production of parts allowed; production of new aircraft not allowed.Production certificate 724NM. Production of parts allowed under this PC.drs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.3 Production basis · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-034 | family | Export (Rev 5): new parts produced under PC 724NM are eligible for an export C of A; complete aircraft are not.Complete aircraft not eligible for a Certificate of Airworthiness for export.drs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.3 Export Eligibility · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009); LTC-11 Rev 4 (FAA, 15 Oct 2007) | pending |
C-X2-035 | family | Equipment: none specified other than engines and propellers; equipment required by the regulations for the operation must be installed; military equipment (except armament) originally in the type may be retained.the aircraft may incorporate such military equipment (except armament) as was originally incorporated in the type for military or naval servicedrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.3 Equipment · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009); Spec L-11-3 (LTC-11 Rev 3, 1947 approval) | pending |
C-X2-036 | family | Additional equipment may be installed if substantiated as presenting no obvious hazard to safety.Additional equipment may be installed as can be substantiated on the basis that it presents no obvious hazard to safety.drs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.3 Equipment · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-037 | family | Note 1: a weight and balance report with equipment list must be submitted for each aircraft; Army or Navy weight records in current condition may be submitted in lieu of an actual weighing.Weight and Balance Report including list of equipment included in the certificated empty weight must be submitted for each aircraft.drs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.3 Note 1 · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009); Spec L-11-3 (LTC-11 Rev 3, 1947 approval) | pending |
C-X2-038 | family | Note 2(a) placard: military type aircraft - not to be used for carriage of passengers or cargo for compensation or hire.This is a military type aircraft and under the Federal Regulations shall not be used for the carriage of passengers or cargo for compensation or hire.drs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.3 Note 2(a) · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009); Spec L-11-3 (LTC-11 Rev 3, 1947 approval) | pending |
C-X2-039 | family | Note 2(b) cockpit placards: "Do not extend full flaps above 165 mph." and "Do not operate landing gear above 170 mph."Do not extend full flaps above 165 mph.drs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.3 Note 2(b) · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009); Spec L-11-3 (LTC-11 Rev 3, 1947 approval) | pending |
C-X2-040 | family | Note 2(b)(3): landing gear placard limit 170 mph.Do not operate landing gear above 170 mph.drs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.3 Note 2(b)(3) · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009); Spec L-11-3 (LTC-11 Rev 3, 1947 approval) | pending |
C-X2-041 | family | Note 2(b)(1) (Rev 5): dive limits placard in accordance with T.O. AN-01-60J-25 for all models.A dive limits placard in accordance with, T.O. AN-01-60J-25 for all models.drs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.3 Note 2(b)(1) · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-042 | family | Note 2(c) airspeed indicator markings: red radial line 505 mph; green radial line 325 mph; yellow arc from green to red line.A red radial line at 505 mph.drs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.3 Note 2(c) · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009); Spec L-11-3 (LTC-11 Rev 3, 1947 approval) | pending |
C-X2-043 | family | Note 3: the Operations Limitations must state that the airplane is operated within T.O. AN-01-60JD-1 (P-51C), AN-01-60JE-1 (P-51D/F-51D and P-51K) and T.O. 01-60-123, 01-60-126 and 01-60J-26 for applicable models, except where LTC-11 gives its own values.for the P-51C, AN-01-60JE-1 for the P-51D (F-51D) and P-51K (F51-K), and T.O. 01-60-123, 01-60-126drs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.3 Note 3 · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-044 | family | Note 3: a copy of the applicable Army Technical Orders and LTC-11 must be carried during flight.A copy of the applicable Army Technical Orders and LTC-11 must be carried during flight.drs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.3 Note 3 · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-045 | family | Note 3: the applicant must secure the Technical Orders; the FAA does not distribute them.The FAA does not have these documents available for distribution.drs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.3 Note 3 · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009); LTC-11 Rev 4 (FAA, 15 Oct 2007) | pending |
C-X2-046 | family | Note 4: structural repairs should follow Army T.O. AN-01-60-3 (all models) or AN-01-60JD-3 (P-51C) / AN-01-60JE-3 (P-51D, P-51K).All structural repairs should be made in accordance with Army Technical Orders AN-01-60-3 for all modelsdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.3 Note 4 · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-047 | family | Note 4: for repairs or modifications the owner must furnish evidence that the modified airplane keeps the original degree of airworthiness; the FAA gives no technical assistance because complete structural data are not held.The FAA can give no technical assistance on such matters since complete structural datadrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.3 Note 4 · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009); Spec L-11-3 (LTC-11 Rev 3, 1947 approval) | pending |
C-X2-048 | family | Note 5: before certification for night operation the exterior lighting must be modified (wing-tip lights A-7/A-8 replaced; A-9 covers painted; tail D-1/D-2 replaced; one SPST switch, own fuse or breaker).Prior to obtaining certification for night operation, the following modifications to the exterior lighting must be made indrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5pp.3-4 Note 5 · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009); Spec L-11-3 (LTC-11 Rev 3, 1947 approval) | pending |
C-X2-049 | family | Note 5: tail light assemblies Type D-1 and D-2 are unsatisfactory and must be replaced with type-certificated units.are unsatisfactory and must be replaced with type certificated units.drs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.4 Note 5(a)(2) · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009); Spec L-11-3 (LTC-11 Rev 3, 1947 approval) | pending |
C-X2-050 | family | Note 7: the listed Mandatory Technical and Service Change orders must be complied with prior to certification; serial references to P-51C and P-51K also apply to F-51C and F-51K.listed for your information and must be complied with prior to certificationdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.4 Note 7 · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-051 | family | Note 7: the FAA has no copies of these publications and FAA inspectors do not have them; compliance data are in the airplane's historical records (A.A.F. forms 60A, 60B and 61).A.A.F forms 60A, 60B, and 61 accompanying the airplanedrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.4 Note 7 · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-052 | family | Rev 3 (Spec L-11-3): the list of mandatory changes required prior to original certification may be obtained from the FAA, Washington, D.C.The list of mandatory changes required prior to original certification may bedrs/LTC-11-Rev3-ocr.txt | Aircraft Specification L-11-3 (LTC-11 Revision 3)p.3 · models approved 4/10/47; DRS revision date 04/10/1947 (copy shows Cavalier as holder, so printed after 1966) · accessed 2026-10-03 | ●Primary source | Spec L-11-3 (LTC-11 Rev 3, 1947 approval) | pending |
C-X2-053 | family | Rev 3 (Spec L-11-3): eligible for certification in Limited Category only.Eligible for certification in Limited Category only.drs/LTC-11-Rev3-ocr.txt | Aircraft Specification L-11-3 (LTC-11 Revision 3)p.1 header · models approved 4/10/47; DRS revision date 04/10/1947 (copy shows Cavalier as holder, so printed after 1966) · accessed 2026-10-03 | ●Primary source | Spec L-11-3 (LTC-11 Rev 3, 1947 approval) | pending |
C-X2-054 | family | Rev 5 changes: adds reference to the F-51D and F-51K, adds the list of T.O.s with eligible serial numbers, adds propeller limits, minor corrections.This revision adds reference to the F-51D, and F-51K, adds list ofdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.1 revision note · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-055 | family | Rev 4 changes: updates the TC holder and reformats the specification into TC data sheet format.This revision updates the TC holder and reformats thedrs/LTC-11-Rev4-verbatim.txt | Type Certificate Data Sheet No. 11 (LTC-11), Revision 4p.1 revision note · October 15, 2007 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 4 (FAA, 15 Oct 2007) | pending |
C-X2-056 | family | LTC-11 Note 7 lists Army T.O. 01-60-95 (May 29, 1945), "Rework of landing gear fairing door actuator mechanism", as mandatory before certification for: P-51D: 44-11153 to 44-11352; 44-13253 to 44-15752; 44-63160. P-51K: 44-11353 to 44-11952.01-60-95 Rework of landing gear fairingdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-057 | family | LTC-11 Note 7 lists Army T.O. 01-60-97 (February 27, 1945), "Inspection and rework of elevator and rudder front beams", as mandatory before certification for: P-51B: 43-12093 to 43-12492; 43-6313 to 43-7202; 42-106429 to 42-106538; 42-106541 to 42-106978; 43-24752 to 43-24901. P-51C: 42-102979 to 42-103978; 43-24902 to 43-35251 [as printed]; 44-10753 to 44-11152. P-51D: 44-13253 to 44-15752; 44-63160 to 44-63161; 44-63162 to 44-63559; 44-11153 to 44-11352. P-51K: 44-11353 to 44-11752; 44-11753 to 44-12052.01-60-97 Inspection and rework ofdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-058 | family | LTC-11 Note 7 lists Army T.O. 1-60-100 [as printed] (August 31, 1945), "Installation of metal covered elevators", as mandatory before certification for: P-51D: 44-11153 to 44-11352; 44-13253 to 44-15752; 44-63160 to 44-64159; 44-72027 to 44-73826. P-51K: 44-11353 to 44-12752.1-60-100 Installation of metal covereddrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-059 | family | LTC-11 Note 7 lists Army T.O. 01-60-102 (November 2 1945), "Installation of cotter pin in main landing gear operating strut end fitting", as mandatory before certification for: P-51D: 44-11153 to 44-11352; 44-12853 to 44-13252; 44-13253 to 44-15752; 44-63160 to 44-64159; 44-72027 to 44-73026. P-51K: 44-11353 to 44-12852.01-60-102 Installation of cotter pin indrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-060 | family | LTC-11 Note 7 lists Army T.O. 01-60-113 (September 20, 1945), "Inspection and re-work if [sic] windshield frame and canopy mechanism", as mandatory before certification for: All P-51D and P-51K series.01-60-113 Inspection and re-work if windshield frame and All P-51D and P-51K Seriesdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-061 | family | LTC-11 Note 7 lists Army T.O. 01-60-116 (July 7, 1945), "Inspection and replacement of rudder, elevator trim tabs", as mandatory before certification for: P-51D: 44-12853 to 44-13252; 44-72328 to 44-74498; 44-84390 to 44-84614. P-51K: 44-12473 to 44-12852.01-60-116 Inspection and replacement of rudder, elevatordrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-062 | family | LTC-11 Note 7 lists Army T.O. 01-60-128 (September 23, 1946), "Modification of landing gear warning and indicating system", as mandatory before certification for: P-51D: 44-12853 to 44-13019; 44-13040 to 44-13130; 44-13141 to 44-13180; 44-13182 to 44-13252; 44-63160 to 44-64159; 44-72027 to 44-75026; 45-11690 to 45-11742; 45-11343 to 45-11654; 44-13020 to 44-13039; 44-13131 to 44-13140; 44-13181; 45-11655 to 45-11689.01-60-128 Modification of landing geardrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-063 | family | LTC-11 Note 7 lists Army T.O. 01-60J-12 (February 12, 1944), "Rework of tail wheel idler camshaft declutching cable", as mandatory before certification for: P-51C: 42-102979 to 42-102988.01-60J-12 Rework of tail wheel idlerdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-064 | family | LTC-11 Note 7 lists Army T.O. 01-60J-17 (April 2, 1945), "Installation of fuselage fuel tank grounding jack", as mandatory before certification for: P-51B: 43-12093 to 43-12492; 43-6313 to 43-7202; 42-106429 to 42-106538; 42-106541 to 42-106638. P-51C: 42-102979 to 42-103778. P-51D: 44-13253 and 44-13254.01-60J-17 Installation of fuselage fueldrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-065 | family | LTC-11 Note 7 lists Army T.O. 01-60J-18 (January 15, 1945), "Reinforcement of horizontal and stabilizer fin", as mandatory before certification for: P-51B: 43-6313 to 43-7202; 43-12093 to 43-12492; 42-106429 to 42-106538; 42-106541 to 42-106765; 42-106766 to 42-106963; 42-106964 to 42-106996; 42-106967 to 42-106978; 43-24752 to 43-24901. P-51C: 42-102797 to 42-103307 [as printed]; 42-103308 to 42-103538; 42-103539 to 42-103578; 43-24902 to 43-25251; 44-10753 to 44-11152. P-51D: 44-13253 to 4-13256 [as printed]; 44-13257 and 44-13258; 44-13259 to 44-13267; 44-13268 to 44-15052; 44-11153 to 44-11352; 42-106540. P-51K: 44-11353 to 44-11376.01-60J-18 Reinforcement of horizontaldrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-066 | family | LTC-11 Note 7 lists Army T.O. 01-60J-21 (June 2, 1944), "Inspection of engine mount attaching nuts", as mandatory before certification for: P-51B series; P-51C prior to AF No. 43-25051; P-51D prior to AF No. 44-13832.01-60J-21 Inspection of engine mountdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-067 | family | LTC-11 Note 7 lists Army T.O. 01-60J-22 (June 1, 1944), "Inspection of landing gear uplock & main gear fairing door locks", as mandatory before certification for: P-51C and D series.01-60J-22 Inspection of landing gear uplockdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-068 | family | LTC-11 Note 7 lists Army T.O. 01-60J-23 (January 18, 1945), "Modification of coolant expansion tank assembly", as mandatory before certification for: P-51B: 43-6713 to 43-7202; 42-106429 to 42-106538. P-51C: 42-103579 to 42-103978; 43-24902 to 43-25112. P-51B, P-51D: 42-106539 to 42-106978; 43-24752 to 43-24899. P-51C: 43-24902 to 43-25112. P-51D: 44-13253 to 44-13962.01-60J-23 Modification of coolantdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-069 | family | LTC-11 Note 7 lists Army T.O. 01-60J-24 (November 2, 1944), "Rework of coolant and oil exit flap actuators, types R-4250", as mandatory before certification for: P-51B: 43-12093 to 43-12492; 43-6313 to 43-7202; 42-106429 to 42-106978; 43-24752 to 43-24901. P-51C: 42-102979 to 42-103978; 43-24902 to 43-25251; 44-10753 to 44-11152. P-51D: 44-13253 to 44-14789; 44-11153 to 44-11226.01-60J-24 Rework of coolant and oildrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-070 | family | LTC-11 Note 7 lists Army T.O. 1-60J-27 [as printed] (October 20, 1944), "Replacement of main fuel cell drain nipple", as mandatory before certification for: P-51B: 42-106429 to 42-106538; 42-106541 to 42-106978; 43-7113 to 43-7202; 43-24752 to 43-24840. P-51C: 42-102979 to 42-103653. P-51D: 44-13253 to 44-13258.1-60J-27 Replacement of main fuel celldrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-071 | family | LTC-11 Note 7 lists Army T.O. 01-60J-29 (September 18, 1944), "Installation of elevator inertia weight", as mandatory before certification for: P-51B: 42-106429 to 42-106538; 42-106541 to 42-106978; 43-6313 to 43-7202; 43-12093 to 43-12492; 43-24752 to 43-24901. P-51C: 42-102979 to 42-103978; 43-24902 to 43-25251; 44-10753 to 44-11152. P-51D: 42-106539 and 42-106540; 44-11153 to 44-11252; 44-13253 to 44-14552.01-60J-29 Installation of elevatordrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-072 | family | LTC-11 Note 7 lists Army T.O. 01-60J-34 (February 16, 1945), "Replacement of fuel hose from selector valve to shut off valve", as mandatory before certification for: P-51C: 42-102979 to 42-103978; 43-24902 to 43-25251; 44-10753 to 44-10902. P-51D: 44-13253 to 44-14252.01-60J-34 Replacement of fuel hose fromdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-073 | family | LTC-11 Note 7 lists Army T.O. 01-60J-36 (November 20, 1944), "Rework of coolant lines to prevent coolant lines chafing at fire wall", as mandatory before certification for: P-51B: 42-106429 to 42-106538; 42-106541 to 42-106978; 43-6313 to 43-7202; 43-12093 to 43-12492; 43-24752 to 42-24901 [as printed]. P-51C: 42-102979 to 42-03978 [as printed]; 43-24902 to 43-25251; 44-10753 to 44-11152.01-60J-36 Rework of coolant lines to preventdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-074 | family | LTC-11 Note 7 lists Army T.O. 01-60J-41 (January 16, 1945), "Reposition of fuel booster resistor", as mandatory before certification for: P-51B: 42-106429 to 42-106538; 42-106541 to 42-106978; 43-6313 to 43-7202; 43-12093 to 43-12492; 43-24752 to 43-24901. P-51C: 42-102979 to 42-103978; 43-24902 to 43-25251; 44-10753 to 44-11152. P-51D: 44-11153 to 44-11352; 44-13253 to 44-14052. P-51K: 44-11353 to 44-11552.01-60J-41 Reposition of fuel booster resistordrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-075 | family | LTC-11 Note 7 lists Army T.O. 01-60J-42 (July 2, 1945), "Replacement of fuel selector switch", as mandatory before certification for: P-51B: 43-12093 to 43-12492; 43-6313 to 43-7202; 42-106429 to 42-106538; 42-106541 to 42-106978; 43-24752 to 43-24901. P-51C: 42-102979 to 42-103978; 43-24902 to 43-25251; 44-10753 to 44-11152. P-51D: 44-13253 to 44-15752; 44-63160 to 44-63959; 44-11153 to 44-11352. P-51K: 44-11353 to 44-12152.01-60J-42 Replacement of fuel selectordrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-076 | family | LTC-11 Note 7 lists Army T.O. 01-60J-45 (February 22, 1945), "Inspection and replacement of coolant header tank inlet hose", as mandatory before certification for: P-51B, P-51C, P-51D and K series.01-60J-45 Inspection and replacement of P-51B, P-51C, P-51D and Kdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-077 | family | LTC-11 Note 7 lists Army T.O. 01-60J-49 (March 31, 1945), "Replacement of spinner front section dowel retaining plate", as mandatory before certification for: P-51K: 44-11353 to 44-11552; 44-11553 to 44-11555.01-60J-49 Replacement of spinner frontdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-078 | family | LTC-11 Note 7 lists Army T.O. 01-60JD-17 (June 12, 1944), "Replacement of propeller control front bell crank", as mandatory before certification for: P-51B: 43-12093 to 43-12492; 43-6313 to 43-6712. P-51C: 42-102979 to 42-103178.01-60JD-17 Replacement of propellerdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-079 | family | LTC-11 Note 7 lists Army T.O. 01-60JD-23 (May 20, 1944), "Replacement of left aileron counterbalance assembly", as mandatory before certification for: P-51B: 43-6313 to 43-7012; 43-7113. P-51C: 42-102979 to 42-103178.01-60JD-23 Replacement of left ailerondrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-080 | family | LTC-11 Note 7 lists Army T.O. 01-60JD-24 (December 11, 1943), "Installation of rivets in upper longeron", as mandatory before certification for: P-51C: 42-102979 to 42-103038; 42-103040 to 42-103051; 42-103053.01-60JD-24 Installation of rivets indrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-081 | family | LTC-11 Note 7 lists Army T.O. 01-60JD-25 (February 12, 1944), "Rework of fuel gage and addition of accumulators to fuel vent system", as mandatory before certification for: P-51B: 43-12099 to 43-12103; 43-12105 to 43-12106; 43-12108 to 43-12109; 43-12111 to 43-12112; 43-12114 to 43-12119; 43-12121 and 43-12131; 43-12135 to 43-12136; 43-12139 to 43-12144; 43-12293 to 43-12295; 43-12296; 43-12298 to 43-12299; 43-12333; 43-12349 to 43-12350; 43-12357 and 43-12369; 43-12371 and 43-12385; 43-12093 to 43-12095; 43-12110 and 43-12150; 43-12304 and 43-12334; 43-12388 to 43-12389; 43-12396. P-51C: 42-102979; 42-102980 to 42-102988.01-60JD-25 Rework of fuel gage and additiondrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-082 | family | LTC-11 Note 7 lists Army T.O. 01-60JD-43 (December 20, 1944), "Installation of dorsal fin and reverse boost tab", as mandatory before certification for: P-51B: 43-12093 to 43-12492; 43-6313 to 43-7202; 42-106429 to 42-106538; 42-106541 to 42-106978; 43-24752 to 43-24901. P-51C: 42-102979 to 42-103978; 43-24902 to 43-25251.01-60JD-43 Installation of dorsal findrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-083 | family | LTC-11 Note 7 lists Army T.O. 01-60JE-11 (September 4, 1944), "Installation on landing gear fairing door cable", as mandatory before certification for: P-51D: 44-13253 to 44-13612.01-60JE-11 Installation on landing geardrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-084 | family | LTC-11 Note 7 lists Army T.O. 01-60JE-31 (July 4, 1945), "Inspection and replacement of main coolant lines", as mandatory before certification for: P-51D: 44-74536 to 44-74726; 44-74728 to 44-74739; 44-74741 to 44-74746; 44-74748 to 44-74750; 44-74752 to 44-74753; 44-74755 to 44-74761; 44-74763 to 44-74770; 44-74778 to 44-74779; 44-74781 to 44-74782; 44-74784 to 44-74785; 44-74792 to 44-74797.01-60JE-31 Inspection and replacement ofdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5Note 7 table · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2-085 | family | 14 CFR 21.189(a)(1): an applicant is entitled to a limited category airworthiness certificate when the aircraft has previously been issued a limited category type certificate and conforms to it.He shows that the aircraft has been previously issued a limited category type certificate and that the aircraft conforms to that type certificate | 14 CFR 21.189 Issue of airworthiness certificate for limited category aircraft21.189(a)(1) · current text as read 2026-10-03 · accessed 2026-10-03 | ◐Secondary source | eCFR 14 CFR 21.189 | pending |
C-X2-086 | family | 14 CFR 21.189(a)(2): the FAA must find, after inspection including a flight check by the applicant, that the aircraft is in a good state of preservation and repair and in a condition for safe operation.The FAA finds, after inspection (including a flight check by the applicant), that the aircraft is in a good state of preservation and repair and is in a condition for safe operation. | 14 CFR 21.189 Issue of airworthiness certificate for limited category aircraft21.189(a)(2) · current text as read 2026-10-03 · accessed 2026-10-03 | ◐Secondary source | eCFR 14 CFR 21.189 | pending |
C-X2-087 | family | 14 CFR 21.189(b): the FAA prescribes the limitations and conditions necessary for safe operation (the aircraft's operating limitations).The FAA prescribes limitations and conditions necessary for safe operation. | 14 CFR 21.189 Issue of airworthiness certificate for limited category aircraft21.189(b) · current text as read 2026-10-03 · accessed 2026-10-03 | ◐Secondary source | eCFR 14 CFR 21.189 | pending |
C-X2-088 | family | 14 CFR 91.315 (as amended by Amdt. 91-378, 89 FR 80340, Oct. 2, 2024): except as provided in 91.326, no person may operate a limited category civil aircraft carrying persons or property for compensation or hire in operations that require a part 119 certificate, are listed in 119.1(e), require fractional-ownership management specifications, or are conducted under part 129, 133 or 137.Except as provided in § 91.326, no person may operate a limited category civil aircraft carrying persons or property for compensation or hire in operations that: | 14 CFR 91.315 Limited category civil aircraft: Operating limitations91.315 · Amdt. 91-378, 89 FR 80340, Oct. 2, 2024 · accessed 2026-10-03 | ◐Secondary source | eCFR 14 CFR 91.315 (Amdt 91-378) | pending |
C-X2-089 | family | 14 CFR 91.326 (Amdt. 91-378, Oct. 2, 2024) is an exception for flight training, flightcrew member checking or testing and names limited category aircraft among the aircraft it covers.a person may conduct flight training, checking, or testing in a limited category aircraft, experimental aircraft, or primary category aircraft | 14 CFR 91.326 Exception to operating certain aircraft for the purposes of flight training, flightcrew member checking, or flightcrew member testing91.326(a) · Amdt. 91-378, 89 FR 80341, Oct. 2, 2024 · accessed 2026-10-03 | ◐Secondary source | eCFR 14 CFR 91.326 | pending |
C-X2-090 | exp-exhibition | 14 CFR 21.191(d) Exhibition: exhibiting the aircraft's flight capabilities, performance or unusual characteristics at air shows, motion picture, television and similar productions, maintaining exhibition flight proficiency, and flying to and from them.Exhibiting the aircraft's flight capabilities, performance, or unusual characteristics at air shows, motion picture, television, and similar productions | 14 CFR 21.191 Experimental certificates21.191(d) · current text as read 2026-10-03 · accessed 2026-10-03 | ◐Secondary source | eCFR 14 CFR 21.191 | pending |
C-X2-091 | exp-exhibition | 14 CFR 21.191(e) Air racing: participating in air races, practising for them, and flying to and from racing events.Participating in air races, including (for such participants) practicing for such air races and flying to and from racing events. | 14 CFR 21.191 Experimental certificates21.191(e) · current text as read 2026-10-03 · accessed 2026-10-03 | ◐Secondary source | eCFR 14 CFR 21.191 | pending |
C-X2-092 | exp-exhibition | 14 CFR 91.319(b): an experimental aircraft may not be operated outside an assigned area until shown controllable throughout its normal speeds and manoeuvres and free of hazardous operating characteristics or design features; 91.319 also restricts operation over densely populated areas and requires day VFR unless otherwise authorized and advising persons carried of the experimental nature.No person may operate an aircraft that has an experimental certificate outside of an area assigned by the Administrator until it is shown that | NTSB Safety Recommendation letter A-12-13 through -17 (to Reno Air Racing Association)pp. letter text quoting 91.319 · April 10, 2012 · accessed 2026-10-03 | ◐Secondary source | eCFR 14 CFR 91.319; NTSB letter A-12-13 to -17 | pending |
C-X2-093 | family | FAA: a limited category special airworthiness certificate is issued to operate surplus military aircraft converted to civilian use (14 CFR 21.189); the page refers to FAA Order 8130.2 Chapter 8 for the list of approved limited category models.A limited category special airworthiness certificate is issued to operate surplus military aircraft that have been converted to civilian use | Special Airworthiness CertificatesLimited category · undated web page, read 2026-10-03 · accessed 2026-10-03 | ◐Secondary source | FAA Special Airworthiness Certificates page | pending |
C-X2-094 | family | FAA Order 8130.2L (effective January 30, 2026) Chapter 8 gives the procedures for limited category airworthiness certificates under 21.189 and carries Table 8-1, "Limited Category TCs"; whether and how LTC-11 is listed there was not read. | Order 8130.2L, Airworthiness Certification of AircraftChapter 8; Table 8-1 · effective January 30, 2026 (per a page summary) · accessed 2026-10-03 | ○Not established | FAA Order 8130.2L | pending |
C-X2-095 | family | FAA AD 81-13-06 R2 covers Hamilton Standard Hydromatic non-counterweighted propellers with aluminium blades whose model list, as cited by CASA AD/PHS/10 Amdt 2 and the CAA NZ schedule (DCA/HAM/12B, 26 Mar 2009), includes the 24D50 - the hub LTC-11 specifies for the P-51C and P-51D. A forum reproduction of the AD (2010) gives Amendment 39-6271 effective September 15, 1989 (revising 39-4409 and 39-4133) and lists North American P-51 among aircraft "such as, but not limited to". | CASA AD/PHS/10 Amdt 2, Hamilton Standard Hydromatic Propeller - Aluminium BladesAD/PHS/10 background; HP schedule; forum post · Amdt 2 (date not captured) · accessed 2026-10-03 | ○Not established | CASA AD/PHS/10 Amdt 2; CAA NZ DCA/HAM/12B; WIX forum copy of AD text (Jan 2010) | pending |
C-X2-096 | family | The CAA NZ Hamilton Standard Hydromatic schedule points to further FAA ADs on Hamilton Standard aluminium blades: 57-13-5 (blade shank corrosion, all aluminium blades in Hydromatic propellers), 58-22-1 (6800, 6900 and 7000 series blades), 64-03-03 (post-impact inspection). | CAA NZ AD schedule - Hamilton Standard Hydromatic propellers (HP)schedule entries DCA/HP/1, /2, /8 · schedule date not captured · accessed 2026-10-03 | ○Not established | CAA NZ HP schedule | pending |
C-X2-097 | family | UK CAA Emergency Mandatory Permit Directive MPD 2013-002-E, effective 1 May 2013, applies to North American P-51B, P-51C, P-51D, P-51K, F-51D and F-51K (inspection of flight control system).North American P-51B, P-51C, P-51D, P-51K, F-51D, F-51K | UK CAA Emergency Mandatory Permit Directive MPD 2013-002-E, Inspection of Flight Control Systemapplicability · effective 1 May 2013 (page version date 30 Apr 2013) · accessed 2026-10-03 | ◐Secondary source | UK CAA MPD 2013-002-E | pending |
C-X2-098 | family | MPD 2013-002-E requires Cal Pacific Airmotive Inc. Service Bulletin P51-001 ("Inspection of Flight Control System", dated 1 May 2013, with Supplement No. 1) within 20 hours or by 1 May 2013, whichever is later, then at each 100 hours or 12 months, whichever first.Within 20 hours of operation or 1 May 2013 whichever is later, and at each 100 hours of operation, or 12 months whichever occurs first | UK CAA Emergency Mandatory Permit Directive MPD 2013-002-E, Inspection of Flight Control Systemcompliance · effective 1 May 2013 (page version date 30 Apr 2013) · accessed 2026-10-03 | ◐Secondary source | UK CAA MPD 2013-002-E | pending |
C-X2-099 | family | Cal Pacific Airmotive (LTC-11 holder) issued SB P51-001, in cooperation with the NTSB, calling for inspection of phenolic trim tabs and of control-system hardware and self-locking (spline) nuts, after an elevator trim tab failure and loss of control; within 20 flight hours or by 1 May 2013, then every 100 hours or 12 months. | Mandatory Service Bulletin Issued: North American P-51 Mustangs (Moreno Aguiari)article · article dated April 9, 2013 (per a page summary) · accessed 2026-10-03 | ◐Secondary source | Vintage Aviation News 2013; UK CAA MPD 2013-002-E | pending |
C-X2-100 | family | CAA NZ AD schedule for the North American P-51 (issued 30 May 2013) lists UK MPD 2013-002-E, "Flight Control System - Inspection and Repair", effective 1 May 2013, for P-51 series Mustangs in New Zealand. | CAA NZ AD schedule - North American P-51 Mustangschedule contents · schedule issued 30 May 2013 · accessed 2026-10-03 | ◐Secondary source | CAA NZ P-51 schedule | pending |
C-X2-101 | not established | CAA NZ DCA/MER/1 (27 May 2010), rocker arm inspection and replacement, applies to Rolls-Royce Merlin engines embodied with Modification 9/223/M2623, installed in types including the P-51 series; based on UK MPD 2010-004. | CAA NZ AD schedule - Rolls-Royce Merlin engines (DCA/MER/1)DCA/MER/1 · DCA/MER/1 effective 27 May 2010 · accessed 2026-10-03 | ◐Secondary source | CAA NZ MER schedule | pending |
C-X2-102 | ca-18 | CASA AD/MUSTANG/1 Amdt 2 (4/86), Wing Front Spar: inspect the lower wing front spar at wing station 27 (and cut-out ends) for cracking at intervals not exceeding 240 hours time in service - CAC CA-18 Mustang series. | CASA AD/MUSTANG/1 Amdt 2, Wing Front SparAD/MUSTANG/1 · 4/86 (per a page summary) · accessed 2026-10-03 | ◐Secondary source | CASA AD/MUSTANG/1 | pending |
C-X2-103 | not established | CASA AD/MUSTANG/2 Amdt 1: magnetic particle inspection of the main landing gear pivot shaft (P/N 17-33163 or 66584) at intervals not exceeding 250 landings and within 10 landings of a heavy landing - for Mustangs engaged in aerial work or charter. | CASA AD/MUSTANG/2 Amdt 1, Main Landing Gear Pivot Shaft - InspectionAD/MUSTANG/2 · date not captured · accessed 2026-10-03 | ◐Secondary source | CASA AD/MUSTANG/2 | pending |
C-X2-104 | p-51d | NTSB/AAB-12/01 (adopted August 27, 2012): North American P-51D N79111, serial 44-15651, "The Galloping Ghost", Race 177, experimental certificate (racing/exhibition), crashed at the Reno National Championship Air Races on September 16, 2011; the pilot and 10 people on the ground were killed and at least 64 injured. | NTSB Aircraft Accident Brief NTSB/AAB-12/01, Pilot/Race 177, The Galloping Ghost, North American P-51D, N79111, Reno, Nevada, September 16, 2011report summary · adopted August 27, 2012 · accessed 2026-10-03 | ◐Secondary source | NTSB AAB-12/01 | pending |
C-X2-105 | p-51d | NTSB probable cause (Galloping Ghost): reduced stiffness of the elevator trim tab system allowed aerodynamic flutter at racing speeds; deteriorated locknut inserts let the trim tab attachment screws loosen and start fatigue cracking in one screw before the accident flight.The probable cause of this accident was the reduced stiffness of the elevator trim tab system that allowed aerodynamic flutter to occur at racing speeds. | NTSB Aircraft Accident Brief NTSB/AAB-12/01, Pilot/Race 177, The Galloping Ghost, North American P-51D, N79111, Reno, Nevada, September 16, 2011probable cause · adopted August 27, 2012 · accessed 2026-10-03 | ◐Secondary source | NTSB AAB-12/01 | pending |
C-X2-106 | p-51d | NTSB: N79111 carried extensive modifications (shortened wings and tail, modified canopy, a single moveable left trim tab removing redundancy, increased elevator counterweights) without documented engineering analysis or flight testing; vertical acceleration peaked at 17.3 g. | NTSB Aircraft Accident Brief NTSB/AAB-12/01, Pilot/Race 177, The Galloping Ghost, North American P-51D, N79111, Reno, Nevada, September 16, 2011analysis · adopted August 27, 2012 · accessed 2026-10-03 | ◐Secondary source | NTSB AAB-12/01 | pending |
C-X2-107 | not established | NTSB recommendations of April 10, 2012 (A-12-9, A-12-13) asked the Unlimited class organiser and the Reno Air Racing Association to require an engineering evaluation, including flight demonstrations and analysis within the anticipated envelope, for aircraft with any major modification to structure or flight controls.Require aircraft owners in the unlimited class to provide an engineering evaluation that includes flight demonstrations and analysis within the anticipated flight envelope | NTSB Safety Recommendation letter A-12-9 through -12 (to National Air Racing Group Unlimited Division)A-12-9; A-12-13 · April 10, 2012 · accessed 2026-10-03 | ◐Secondary source | NTSB A-12-9 to -12; NTSB A-12-13 to -17 | pending |
C-X2-108 | p-51d | NTSB CEN14LA015: a P-51D crashed into the water near Galveston, Texas, in October 2013, killing the pilot and passenger; probable cause the pilot's loss of situational awareness while instructing the passenger, resulting in controlled flight into the water. | Two killed in P-51 crash (NTSB final report CEN14LA015)article · October 7, 2015 · accessed 2026-10-03 | ◐Secondary source | NTSB CEN14LA015 (via GA News) | pending |
C-X2-109 | p-51d | G-MSTG, P-51D serial 45-11518, crashed near Hardwick airfield, Norfolk, UK, on October 2, 2016 (one passenger killed, pilot seriously injured); the AAIB concluded loss of directional control from crosswind and go-around power applied at low speed.The accident was most likely a result of loss of directional control due to a combination of crosswind and effects of applying go-around power whilst the aircraft was at low speed. | ASN Wikibase occurrence 190440 (G-MSTG, 2 Oct 2016)occurrence · read 2026-10-03 · accessed 2026-10-03 | ◐Secondary source | ASN wikibase 190440 (quoting AAIB) | pending |
C-X2-110 | not established | F-51D N251CS crashed during aerobatic practice at Vicksburg Tallulah Regional Airport, Mound, Louisiana, on May 12, 2026 (pilot killed); the NTSB preliminary report found no evidence of mechanical failure; probable cause not yet determined. | NTSB Finds No Mechanical Anomalies in Fatal F-51D Crasharticle · June 10, 2026 · accessed 2026-10-03 | ◐Secondary source | AVweb 10 Jun 2026 (NTSB preliminary) | pending |
C-X2-111 | p-51d | NTSB LAX84LA441: on August 18, 1984 at Madera, California, P-51D N65206 and P-63C N62822, both holding limited airworthiness certificates, collided on the landing roll; no injuries; findings against the P-63 pilot. | NTSB aviation investigation report LAX84LA441 (Madera, CA, 18 Aug 1984)report · event 1984-08-18 · accessed 2026-10-03 | ◐Secondary source | NTSB LAX84LA441 | pending |
C-X2-112 | ltc11-p-51d | STC SA02719CH (Roush Industries, Livonia, Michigan): installation of a Packard-built Rolls-Royce V-1650-9A engine per USAF T.O. 01-60JE-2 (re-designated 1F-51D-2).Installation of a Packard built Rolls Royce V-1650-9A engine in accordance with USAF Technical Order 01-60JE-2 (or as re-drs/STC-SA02719CH-verbatim.txt | Supplemental Type Certificate SA02719CH (Roush Industries)p.1 Description of Type Design Change · issued April 30, 2009 · accessed 2026-10-03 | ●Primary sourceSingle source headline | STC SA02719CH (FAA, 2009) | pending |
C-X2-113 | ltc11-p-51d | SA02719CH original product: Type Certificate LTC-11, North American Aviation, model P-51D (only).Make : * North American Aviationdrs/STC-SA02719CH-verbatim.txt | Supplemental Type Certificate SA02719CH (Roush Industries)p.1 Original Product · issued April 30, 2009 · accessed 2026-10-03 | ●Primary source | STC SA02719CH | pending |
C-X2-114 | ltc11-p-51d | SA02719CH: date of application April 25, 2008; date of issuance April 30, 2009 (Chicago ACO).Date of issuance: April 30, 2009drs/STC-SA02719CH-verbatim.txt | Supplemental Type Certificate SA02719CH (Roush Industries)p.1 dates · issued April 30, 2009 · accessed 2026-10-03 | ●Primary source | STC SA02719CH | pending |
C-X2-115 | ltc11-p-51d | SA02719CH condition: FAA Approved Airplane Flight Manual Supplement for the P-51D with Packard-built V-1650-9A, dated March 27, 2009 or later approved revision, must be used.V-1650-9A Engine Installed must be used, dated March 27, 2009, or later FAA Approved revision.drs/STC-SA02719CH-verbatim.txt | Supplemental Type Certificate SA02719CH (Roush Industries)Limitations and Conditions 3 · issued April 30, 2009 · accessed 2026-10-03 | ●Primary source | STC SA02719CH | pending |
C-X2-116 | ltc11-p-51d | SA02719CH condition: compatibility with previously approved modifications must be determined by the installer.Compatibility of this design change with previously approved modifications must be determined by the installer.drs/STC-SA02719CH-verbatim.txt | Supplemental Type Certificate SA02719CH (Roush Industries)Limitations and Conditions 1 · issued April 30, 2009 · accessed 2026-10-03 | ●Primary source | STC SA02719CH | pending |
C-X2-117 | ltc11-p-51d | SA02719CH condition: aircraft specification limits are those of the type certificate data sheet except as modified by the STC.Aircraft Specification Limits are the same as listed on the Type Certificate Data Sheet except as modified in accordance with thisdrs/STC-SA02719CH-verbatim.txt | Supplemental Type Certificate SA02719CH (Roush Industries)Limitations and Conditions 2 · issued April 30, 2009 · accessed 2026-10-03 | ●Primary source | STC SA02719CH | pending |
C-X2-118 | ltc11-p-51d | SA02719CH certifies the change as meeting Part 23 of the Federal Aviation Regulations, installation per T.O. 01-60JE-2 Section IV, Paragraph 8.f.(2A) as revised December 20, 1952.designated 1F-51D-2), Section IV, Paragraph 8.f. (2A) as revised December 20, 1952drs/STC-SA02719CH-verbatim.txt | Supplemental Type Certificate SA02719CH (Roush Industries)p.1 · issued April 30, 2009 · accessed 2026-10-03 | ●Primary source | STC SA02719CH | pending |
C-X2-119 | not established | STC SA02423AK (Dakota Mustang, Inc., Wahpeton, ND) is NOT a P-51 approval: it is limited to the installation in one Piper PA-18 "150", serial 18-7809074 (N4122E).This approval is limited to only the installation made in Piper PA-18 “150” Serial No.drs/STC-SA02423AK-verbatim.txt | Supplemental Type Certificate SA02423AK (Dakota Mustang, Inc.)Limitations and Conditions 1 · issued December 20, 2013; reissued January 10, 2014 · accessed 2026-10-03 | ●Primary source | STC SA02423AK | pending |
C-X2-120 | not established | SA02423AK original product: Type Certificate 1A2, Piper PA-18 "150"; issued December 20, 2013, reissued January 10, 2014.Original Product – Type Certificate Number: 1A2drs/STC-SA02423AK-verbatim.txt | Supplemental Type Certificate SA02423AK (Dakota Mustang, Inc.)p.1 · issued December 20, 2013; reissued January 10, 2014 · accessed 2026-10-03 | ●Primary source | STC SA02423AK | pending |
C-X2-121 | tf-51d-civil | Stallion 51 (Kissimmee Gateway Airport, Florida) states it offers P-51 orientation flights, checkout, recurrent and formation training in its Mustangs ("Crazy Horse", "Crazy Horse 2", "The Little Witch"), plus maintenance, acceptance flight testing and aircraft sales.Stallion 51 Corporation offers various Orientation Flight programs | Stallion 51 (company website)home page · as checked 2026-10-03 · accessed 2026-10-03 | ◇Owner/builder reported | Stallion 51 website | pending |
C-X2-122 | not established | Vintage V12s, Inc. (Tehachapi, California) states it builds Merlin, Griffon and Allison engines for restoration and racing and supplies parts.Vintage V12's specializes in building Merlin, Griffon and Allison engines for restoration and racing. | Vintage V12s (company website)home page · as checked 2026-10-03 · accessed 2026-10-03 | ◇Owner/builder reported | Vintage V12s website | pending |
C-X2-123 | not established | AirCorps Aviation, Inc. (Bemidji, Minnesota) states it restores, maintains and fabricates parts for WWII aircraft including P-51 Mustangs and holds the AirCorps Library of over half a million original drawings and manuals.over a half million original drawings and manuals | AirCorps Aviation (company website)home page · as checked 2026-10-03 · accessed 2026-10-03 | ◇Owner/builder reported | AirCorps Aviation website | pending |
C-X2-124 | not established | In 2002 Air & Space named Mystery Aire (Gilroy, California; Dwight Thorn), Vintage V-12s (Tehachapi; Mike Nixon) and JRS Enterprises (Minneapolis area) as V-12 overhaulers; Thorn quoted $60,000-80,000 for a standard overhaul and Nixon said restoration engines return for overhaul in six or seven years.$60,000 to $80,000 for an overhaul | Masters of the V-12 (Stephan Wilkinson)article · March 2002 · accessed 2026-10-03 | ◐Secondary source | Air & Space 2002 (Wilkinson) | pending |
C-X2-125 | tf-51d-civil | Stallion 51 Flight Operations LLC petitioned the FAA (docket FAA-2024-0318, published April 25, 2024) for relief from 14 CFR 91.9, 91.111(c), 91.315, 119.5(g) and 119.21(a) to let the public fly, under an instructor, its four North American P-51D (TF-51) airplanes certificated in the limited category.to provide a 'hands-on' warbird flight experience to the public in its four North American P-51D (TF-51) airplanes certificated as limited category civil aircraft | Petition for Exemption; Summary of Petition Received; Stallion 51 Flight Operations LLC (FR doc 2024-08881, docket FAA-2024-0318)Description of relief sought · April 25, 2024 · accessed 2026-10-03 | ◐Secondary source | FR 2024-08881 (FAA petition summary) | pending |
C-X2-126 | family | The final rule adding 91.326 (published October 2, 2024, effective December 2, 2024) lets flight training, checking or testing be done in a limited category aircraft without a letter of deviation authority when the instructor is not providing both the training and the aircraft, nobody broadly offers the aircraft for the activity, and nobody is compensated for use of the aircraft beyond ownership and operating expenses; only instructors, examiners, trainees and essential crew may be aboard.the authorized instructor is not providing both the training and the aircraft | Public Aircraft Logging of Flight Time, Training in Certain Aircraft Holding Special Airworthiness Certificates, and Flight Instructor Privileges - final rule (FR doc 2024-22009)final rule text (91.326) · published October 2, 2024; effective December 2, 2024 · accessed 2026-10-03 | ◐Secondary source | FR 2024-22009 final rule | pending |
C-X2-127 | tf-51d-civil | FAA Exemption No. 8593 (docket FAA-2002-12993), granted 8/01/2005, relieves Stallion 51 Corporation from 14 CFR 91.315 to provide initial and recurrent training, and training under contract with the U.S. military, in its two North American TF-51 airplanes certificated as limited category civil aircraft.to provide initial and recurrent training and training under contract with the U.S. military in its two North American TF-51 airplanes certified as limited category civil aircraft | Petitions for Exemption; Dispositions of Petitions Issued (FR doc 05-17215)Stallion 51 entry · August 30, 2005 · accessed 2026-10-03 | ◐Secondary source | FR 05-17215 (FAA disposition notice) | pending |
C-X2b-001 | ltc11-p-51c;ltc11-p-51d | AD 81-13-06 R2 applies to Hamilton Standard Hydromatic (noncounterweighted) propellers with aluminum blades that use engine oil for pitch control; it does not apply to propellers with integral oil control or with steel blades.propellers with aluminum blades that use engine oil for pitch control (does not apply to propellers with integral oil control or to propellers with steel blades)drs/AD-81-13-06-R2-verbatim.txt | Airworthiness Directive 81-13-06 R2, Hamilton Standard: Hydromatic (noncounterweighted) propellers with aluminum bladesApplicability · Amendment 39-6271, effective September 15, 1989 · accessed 2026-10-03 | ●Primary source | FAA AD 81-13-06 R2 (Amdt. 39-6271, eff. 15 Sep 1989) | pending |
C-X2b-002 | ltc11-p-51c;ltc11-p-51d | The propeller types listed in AD 81-13-06 R2 include the 24D50, the Hamilton Standard hub LTC-11 Rev 5 specifies for the P-51C and P-51D.of the following types: 22D30, 22D40, 23D40, 23E50, 23E60, 24D50, 24E60, 33D50drs/AD-81-13-06-R2-verbatim.txt | Airworthiness Directive 81-13-06 R2, Hamilton Standard: Hydromatic (noncounterweighted) propellers with aluminum bladesApplicability · Amendment 39-6271, effective September 15, 1989 · accessed 2026-10-03 | ●Primary source | FAA AD 81-13-06 R2 (Amdt. 39-6271, eff. 15 Sep 1989); LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2b-003 | ltc11-p-51c;ltc11-p-51d | AD 81-13-06 R2 names the North American AT-6, B-25 and P-51 among the aircraft on which the listed propeller types are installed (a list "such as, but not limited to").McDonnell Douglas B-26, DC-3, DC-4, DC-6, and DC-7 series, North American AT-6, B-25, P-51, SNJ-5, T-6 and T-28.drs/AD-81-13-06-R2-verbatim.txt | Airworthiness Directive 81-13-06 R2, Hamilton Standard: Hydromatic (noncounterweighted) propellers with aluminum bladesApplicability · Amendment 39-6271, effective September 15, 1989 · accessed 2026-10-03 | ●Primary source | FAA AD 81-13-06 R2 (Amdt. 39-6271, eff. 15 Sep 1989) | pending |
C-X2b-004 | ltc11-p-51c;ltc11-p-51d | AD 81-13-06 R2 is Amendment 39-6271, effective September 15, 1989.This amendment (39-6271, AD 81-13-06 R2) becomes effective on September 15, 1989drs/AD-81-13-06-R2-verbatim.txt | Airworthiness Directive 81-13-06 R2, Hamilton Standard: Hydromatic (noncounterweighted) propellers with aluminum bladesclosing paragraph · Amendment 39-6271, effective September 15, 1989 · accessed 2026-10-03 | ●Primary source | FAA AD 81-13-06 R2 (Amdt. 39-6271, eff. 15 Sep 1989) | pending |
C-X2b-005 | ltc11-p-51c;ltc11-p-51d | AD 81-13-06 R2 is issued to prevent propeller blade failure due to corrosion and fatigue.To prevent propeller blade failure due to corrosion and fatigue, accomplish the following:drs/AD-81-13-06-R2-verbatim.txt | Airworthiness Directive 81-13-06 R2, Hamilton Standard: Hydromatic (noncounterweighted) propellers with aluminum bladesCompliance · Amendment 39-6271, effective September 15, 1989 · accessed 2026-10-03 | ●Primary source | FAA AD 81-13-06 R2 (Amdt. 39-6271, eff. 15 Sep 1989) | pending |
C-X2b-006 | ltc11-p-51c;ltc11-p-51d | AD 81-13-06 R2 (a): inspect the blades for corrosion in the blade fillet and shank area within 90 days after July 1, 1982, or within 18 months since the last inspection, whichever occurs later (per Hamilton Standard Aluminum Blade Overhaul Manual No. 130B, March 1, 1980).Inspect propeller blades within the next 90 days after July 1, 1982, or within 18 months since last inspection, whichever occurs later, for corrosion in the blade fillet and shank areadrs/AD-81-13-06-R2-verbatim.txt | Airworthiness Directive 81-13-06 R2, Hamilton Standard: Hydromatic (noncounterweighted) propellers with aluminum bladespara. (a) · Amendment 39-6271, effective September 15, 1989 · accessed 2026-10-03 | ●Primary source | FAA AD 81-13-06 R2 (Amdt. 39-6271, eff. 15 Sep 1989) | pending |
C-X2b-007 | ltc11-p-51c;ltc11-p-51d | AD 81-13-06 R2 (a): where corrosion is found, reinspect at intervals not exceeding 18 months.Thereafter, if corrosion is found reinspect at intervals not to exceed 18 months since the last inspection.drs/AD-81-13-06-R2-verbatim.txt | Airworthiness Directive 81-13-06 R2, Hamilton Standard: Hydromatic (noncounterweighted) propellers with aluminum bladespara. (a) · Amendment 39-6271, effective September 15, 1989 · accessed 2026-10-03 | ●Primary source | FAA AD 81-13-06 R2 (Amdt. 39-6271, eff. 15 Sep 1989) | pending |
C-X2b-008 | ltc11-p-51c;ltc11-p-51d | AD 81-13-06 R2 (b)(1): if all installed blades were free of corrosion at the last inspection, reinspect between 33 and 39 months since that inspection.Reinspect between 33 and 39 months since the last inspection.drs/AD-81-13-06-R2-verbatim.txt | Airworthiness Directive 81-13-06 R2, Hamilton Standard: Hydromatic (noncounterweighted) propellers with aluminum bladespara. (b)(1) · Amendment 39-6271, effective September 15, 1989 · accessed 2026-10-03 | ●Primary source | FAA AD 81-13-06 R2 (Amdt. 39-6271, eff. 15 Sep 1989) | pending |
C-X2b-009 | ltc11-p-51c;ltc11-p-51d | AD 81-13-06 R2 (b)(2): if no corrosion is found at the 33-39 month reinspection, reinspect thereafter at intervals not exceeding 60 months.then thereafter reinspect at intervals not to exceed 60 monthsdrs/AD-81-13-06-R2-verbatim.txt | Airworthiness Directive 81-13-06 R2, Hamilton Standard: Hydromatic (noncounterweighted) propellers with aluminum bladespara. (b)(2) · Amendment 39-6271, effective September 15, 1989 · accessed 2026-10-03 | ●Primary source | FAA AD 81-13-06 R2 (Amdt. 39-6271, eff. 15 Sep 1989) | pending |
C-X2b-010 | ltc11-p-51c;ltc11-p-51d | AD 81-13-06 R2 (c): before further flight, blades with fillet or shank corrosion must be replaced with an airworthy blade or repaired per Hamilton Standard Manual No. 130B.Prior to further flight, blades with corrosion in the fillet or shank area must be replaced with an airworthy blade or repaired in accordance with Hamilton Standard Aluminum Blade Overhaul Manualdrs/AD-81-13-06-R2-verbatim.txt | Airworthiness Directive 81-13-06 R2, Hamilton Standard: Hydromatic (noncounterweighted) propellers with aluminum bladespara. (c) · Amendment 39-6271, effective September 15, 1989 · accessed 2026-10-03 | ●Primary source | FAA AD 81-13-06 R2 (Amdt. 39-6271, eff. 15 Sep 1989) | pending |
C-X2b-011 | ltc11-p-51c;ltc11-p-51d | AD 81-13-06 R2 revises AD 81-13-06 R1 (Amendment 39-4409, 47 FR 36217, August 19, 1982), which revised the original AD 81-13-06 (Amendment 39-4133).This AD revises AD 81-13-06 R1, Amendment 39-4409, (47 FR 36217; August 19, 1982), which revised AD 81-13-06, Amendment 39-4133.drs/AD-81-13-06-R2-verbatim.txt | Airworthiness Directive 81-13-06 R2, Hamilton Standard: Hydromatic (noncounterweighted) propellers with aluminum bladesclosing paragraph · Amendment 39-6271, effective September 15, 1989 · accessed 2026-10-03 | ●Primary source | FAA AD 81-13-06 R2 (Amdt. 39-6271, eff. 15 Sep 1989) | pending |
C-X2b-012 | ltc11-p-51c;ltc11-p-51d | LTC-11 Rev 5 specifies for the P-51C and P-51D a Hamilton Standard propeller of 11 ft 2 in diameter with governor 4G10.P-51C, and P-51D, Diameter 11’2”, Governor 4G10, Hamilton Standarddrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.1, Propeller and Propeller limits · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2b-013 | ltc11-p-51c;ltc11-p-51d | The Hamilton Standard hub LTC-11 Rev 5 specifies for the P-51C and P-51D is the 24D50.Propeller limits 24D50 hubsdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.1, Propeller and Propeller limits · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2b-014 | ltc11-p-51c;ltc11-p-51d | LTC-11 Rev 5 lists blade J6523A-24 for the 24D50 hub, stop settings at the 42-in. station 23.2 degrees low and 65.2 degrees high.J6523A-24 23.2 degrees 65.2 degreesdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5pp.1-2, Propeller limits · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2b-015 | ltc11-p-51c;ltc11-p-51d | LTC-11 Rev 5 also lists blades J6487A-24, K6523A-24 and 6547A-6 with the same stop settings (V-1650-3 table; J6487A-24 is printed twice).J6487A-24 “ “ K6523A-24 “ “ J6487A-24 “ “ 6547A-6 “ “drs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.2, Propeller limits (V-1650-3 engine) · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2b-016 | ltc11-p-51k | LTC-11 Rev 5 lists the P-51K with an Aeroproducts A-542A-1 propeller (blade A20-156-24M, 11 ft 0 in), not a Hamilton Standard: the Hamilton Standard ADs 81-13-06 R2, 57-13-05 and 64-03-03 do not reach the P-51K through its LTC-11 propeller.P-51K, Diameter 11’0”, Aeroproducts A-542A-1, blade number A20-156-24Mdrs/LTC-11-Rev5-verbatim.txt | Limited Type Certificate Data Sheet No. 11 (LTC-11), Revision 5p.2, Propeller and Propeller limits · November 18, 2009 · accessed 2026-10-03 | ●Primary source | LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2b-017 | f-51d | The F-51D flight handbook describes the propeller as an 11 ft 2 in, four-bladed, constant-speed Hamilton Standard Hydromatic of the nonfeathering type.four-bladed, constant-speed, Hamilton Standard Hydromatic propeller of the nonfeathering typemanuals/TO-01-60JE-1-FH-F-51D-b-djvu.txt | T.O. 1F-51D-1 Flight Handbook, USAF Series F-51D (formerly AN 01-60JE-1)Section I, Propeller · 20 January 1954 · accessed 2026-10-03 | ●Primary source | T.O. 1F-51D-1 (USAF, 20 Jan 1954) | pending |
C-X2b-018 | f-51d | In the F-51D the propeller governor admits engine oil to the propeller dome for pitch changes, matching the "use engine oil for pitch control" condition of AD 81-13-06 R2.admits engine oil to the propeller dome for pitch changesmanuals/TO-01-60JE-1-FH-F-51D-b-djvu.txt | T.O. 1F-51D-1 Flight Handbook, USAF Series F-51D (formerly AN 01-60JE-1)Section I, Propeller · 20 January 1954 · accessed 2026-10-03 | ●Primary source | T.O. 1F-51D-1 (USAF, 20 Jan 1954) | pending |
C-X2b-019 | p-51d;p-51k | The P-51D/K flight operating instructions state that the only difference between the P-51K and P-51D is the propeller: Hamilton Standard four-blade on the P-51D, Aeroproducts four-blade on the P-51K.Airplanes are equipped with Hamilton Standard four-blade propellers; the P-51K Airplanes are equipped with Aero- products four-blade propellersmanuals/AN-01-60JE-1-FOI-P-51D-K-djvu.txt | AN 01-60JE-1 Pilot's Flight Operating Instructions, USAF Models P-51D and P-51K SeriesSection I, description · OCR header shows "NOVEMBER 1945" and a revision "17 DECEMBER 1947" (OCR; base date not cleanly legible) · accessed 2026-10-03 | ●Primary source | AN 01-60JE-1 P-51D/K (USAF, OCR edition read) | pending |
C-X2b-020 | ltc11-p-51c;ltc11-p-51d | AD 57-13-05 applies to all Hamilton Standard aluminum alloy blades used in Hydromatic (noncounterweight type) propellers; it names no propeller model or aircraft.Applies to All Hamilton Standard Aluminum Alloy Blades Used in Hydromatic (Noncounterweight Type) Propellersdrs/AD-57-13-05-verbatim.txt | Airworthiness Directive 57-13-05, Hamilton Standard: all aluminum alloy blades used in Hydromatic (noncounterweight type) propellersApplicability (heading paragraph) · amendment and effective date not printed in the DRS text (DRS metadata Effective Date blank) · accessed 2026-10-03 | ●Primary source | FAA AD 57-13-05 (DRS text); FAA AD 81-13-06 R2 (Amdt. 39-6271, eff. 15 Sep 1989) | pending |
C-X2b-021 | ltc11-p-51c;ltc11-p-51d | AD 57-13-05 excepts blades with integrally molded chafing rings (Hamilton Standard Service Bulletin No. 508).With the Exception of Blades With Integrally Molded Chafing Rings (Refer Hamilton Standard Service Bulletin No. 508)drs/AD-57-13-05-verbatim.txt | Airworthiness Directive 57-13-05, Hamilton Standard: all aluminum alloy blades used in Hydromatic (noncounterweight type) propellersApplicability · amendment and effective date not printed in the DRS text (DRS metadata Effective Date blank) · accessed 2026-10-03 | ●Primary source | FAA AD 57-13-05 (DRS text) | pending |
C-X2b-022 | ltc11-p-51c;ltc11-p-51d | AD 57-13-05 also excepts blades already incorporating corrosion barriers installed per Service Bulletins 390, 414 and 414A, provided the barrier is in good condition.Those Blades Already Incorporating Corrosion Barriers Installed in Accordance With Service Bulletins Numbers 390, 414, and 414A, Provided This Corrosion Barrier is in Good Condition.drs/AD-57-13-05-verbatim.txt | Airworthiness Directive 57-13-05, Hamilton Standard: all aluminum alloy blades used in Hydromatic (noncounterweight type) propellersApplicability · amendment and effective date not printed in the DRS text (DRS metadata Effective Date blank) · accessed 2026-10-03 | ●Primary source | FAA AD 57-13-05 (DRS text) | pending |
C-X2b-023 | ltc11-p-51c;ltc11-p-51d | AD 57-13-05 item 1: at each removal of a propeller blade from the hub after December 1, 1957, inspect the shank area of blades without a corrosion barrier for corrosion.At each removal of propeller blade from hub after December 1, 1957, inspect for corrosion the shank area of blades not incorporating a corrosion barrier.drs/AD-57-13-05-verbatim.txt | Airworthiness Directive 57-13-05, Hamilton Standard: all aluminum alloy blades used in Hydromatic (noncounterweight type) propellersitem 1 · amendment and effective date not printed in the DRS text (DRS metadata Effective Date blank) · accessed 2026-10-03 | ●Primary source | FAA AD 57-13-05 (DRS text) | pending |
C-X2b-024 | ltc11-p-51c;ltc11-p-51d | AD 57-13-05: operators who have had shank corrosion on any blade in the past 5 years, and those who find corrosion at the inspection, must install the corrosion barrier.Operators who have experienced corrosion in the shank area of any blade in the past 5 years and those who find corrosion during the above inspection must install the corrosion barrierdrs/AD-57-13-05-verbatim.txt | Airworthiness Directive 57-13-05, Hamilton Standard: all aluminum alloy blades used in Hydromatic (noncounterweight type) propellersitem 1 · amendment and effective date not printed in the DRS text (DRS metadata Effective Date blank) · accessed 2026-10-03 | ●Primary source | FAA AD 57-13-05 (DRS text) | pending |
C-X2b-025 | ltc11-p-51c;ltc11-p-51d | AD 57-13-05 followed a blade failure: the failed blade showed severe corrosion in the seal area at the shank and had no corrosion barrier.Investigation of a recently failed blade revealed the existence of severe corrosion in the seal area at the shank.drs/AD-57-13-05-verbatim.txt | Airworthiness Directive 57-13-05, Hamilton Standard: all aluminum alloy blades used in Hydromatic (noncounterweight type) propellersdiscussion · amendment and effective date not printed in the DRS text (DRS metadata Effective Date blank) · accessed 2026-10-03 | ●Primary source | FAA AD 57-13-05 (DRS text) | pending |
C-X2b-026 | ltc11-p-51c;ltc11-p-51d | AD 57-13-05: any blade reworked below the minimum shank diameters tabulated in Service Bulletin 508 is removed from service.Remove from service any blade reworked below the minimum shank diameters tabulated in the bulletin.drs/AD-57-13-05-verbatim.txt | Airworthiness Directive 57-13-05, Hamilton Standard: all aluminum alloy blades used in Hydromatic (noncounterweight type) propellersdiscussion · amendment and effective date not printed in the DRS text (DRS metadata Effective Date blank) · accessed 2026-10-03 | ●Primary source | FAA AD 57-13-05 (DRS text) | pending |
C-X2b-027 | ltc11-p-51c;ltc11-p-51d | AD 64-03-03 applies to all Hamilton Standard aluminum-alloy propeller blades.Applies to All Hamilton Standard Aluminum-Alloy Propeller Blades.drs/AD-64-03-03-verbatim.txt | Airworthiness Directive 64-03-03, Hamilton Standard: all aluminum-alloy propeller bladesApplicability · Amdt. 678 Part 507, Federal Register January 29, 1964; effective March 1, 1964 · accessed 2026-10-03 | ●Primary source | FAA AD 64-03-03 (Amdt. 678, eff. 1 Mar 1964) | pending |
C-X2b-028 | ltc11-p-51c;ltc11-p-51d | AD 64-03-03 lists airliner installations (Boeing 377, Convair, Douglas, Lockheed, Martin) as including "but not necessarily confined to" those types; the P-51 is not named.(Aircraft on Which These Propeller Blades are Installed Include but are not Necessarily Confined to the Boeing 377drs/AD-64-03-03-verbatim.txt | Airworthiness Directive 64-03-03, Hamilton Standard: all aluminum-alloy propeller bladesApplicability · Amdt. 678 Part 507, Federal Register January 29, 1964; effective March 1, 1964 · accessed 2026-10-03 | ●Primary source | FAA AD 64-03-03 (Amdt. 678, eff. 1 Mar 1964) | pending |
C-X2b-029 | ltc11-p-51c;ltc11-p-51d | AD 64-03-03 is Amdt. 678, Part 507, published in the Federal Register January 29, 1964, effective March 1, 1964.Amdt. 678 Part 507 Federal Register January 29, 1964.drs/AD-64-03-03-verbatim.txt | Airworthiness Directive 64-03-03, Hamilton Standard: all aluminum-alloy propeller bladesheading paragraph · Amdt. 678 Part 507, Federal Register January 29, 1964; effective March 1, 1964 · accessed 2026-10-03 | ●Primary source | FAA AD 64-03-03 (Amdt. 678, eff. 1 Mar 1964) | pending |
C-X2b-030 | ltc11-p-51c;ltc11-p-51d | AD 64-03-03 is effective March 1, 1964.This directive effective March 1, 1964.drs/AD-64-03-03-verbatim.txt | Airworthiness Directive 64-03-03, Hamilton Standard: all aluminum-alloy propeller bladesclosing line · Amdt. 678 Part 507, Federal Register January 29, 1964; effective March 1, 1964 · accessed 2026-10-03 | ●Primary source | FAA AD 64-03-03 (Amdt. 678, eff. 1 Mar 1964) | pending |
C-X2b-031 | ltc11-p-51c;ltc11-p-51d | AD 64-03-03 is triggered by known or suspected impact of aluminum-alloy blades with solid objects, whether the blades are static or rotating.For all aluminum-alloy propeller blades exposed to known or suspected impact with solid objects (blades static or rotating), the following shall be accomplished:drs/AD-64-03-03-verbatim.txt | Airworthiness Directive 64-03-03, Hamilton Standard: all aluminum-alloy propeller bladesCompliance · Amdt. 678 Part 507, Federal Register January 29, 1964; effective March 1, 1964 · accessed 2026-10-03 | ●Primary source | FAA AD 64-03-03 (Amdt. 678, eff. 1 Mar 1964) | pending |
C-X2b-032 | ltc11-p-51c;ltc11-p-51d | AD 64-03-03 (a): non-surface-treated blades whose repair needs bending or twisting must be removed and repaired before further flight.If repair of damage requires procedures that include bending or twisting, the blade shall be removed and repaired before further flight.drs/AD-64-03-03-verbatim.txt | Airworthiness Directive 64-03-03, Hamilton Standard: all aluminum-alloy propeller bladespara. (a) · Amdt. 678 Part 507, Federal Register January 29, 1964; effective March 1, 1964 · accessed 2026-10-03 | ●Primary source | FAA AD 64-03-03 (Amdt. 678, eff. 1 Mar 1964) | pending |
C-X2b-033 | ltc11-p-51c;ltc11-p-51d | AD 64-03-03 (b)(1): surface-treated blades with visual bending, twisting or other damage are removed before further flight and sent to Hamilton Standard for repair.Blades with visual evidence of bending, twisting, or other damage shall be removed before further flight and submitted to Hamilton Standard for repair.drs/AD-64-03-03-verbatim.txt | Airworthiness Directive 64-03-03, Hamilton Standard: all aluminum-alloy propeller bladespara. (b)(1) · Amdt. 678 Part 507, Federal Register January 29, 1964; effective March 1, 1964 · accessed 2026-10-03 | ●Primary source | FAA AD 64-03-03 (Amdt. 678, eff. 1 Mar 1964) | pending |
C-X2b-034 | ltc11-p-51c;ltc11-p-51d | AD 64-03-03 (b)(2)(ii): with no alignment gage, a propeller whose track is within limits may stay in service up to 50 hours before the face alignment check.If track is within limits, the propeller may be continued in service for a period not to exceed 50 hours' time in servicedrs/AD-64-03-03-verbatim.txt | Airworthiness Directive 64-03-03, Hamilton Standard: all aluminum-alloy propeller bladespara. (b)(2)(ii) · Amdt. 678 Part 507, Federal Register January 29, 1964; effective March 1, 1964 · accessed 2026-10-03 | ●Primary source | FAA AD 64-03-03 (Amdt. 678, eff. 1 Mar 1964) | pending |
C-X2b-035 | ltc11-p-51c;ltc11-p-51d | AD 64-03-03 supersedes AD 59-17-03.This supersedes AD 59-17-03.drs/AD-64-03-03-verbatim.txt | Airworthiness Directive 64-03-03, Hamilton Standard: all aluminum-alloy propeller bladesclosing paragraph · Amdt. 678 Part 507, Federal Register January 29, 1964; effective March 1, 1964 · accessed 2026-10-03 | ●Primary source | FAA AD 64-03-03 (Amdt. 678, eff. 1 Mar 1964) | pending |
C-X2b-036 | family | AD 58-22-01 applies only to Hamilton Standard 6800, 6900 and 7000 series externally surface-treated aluminum alloy blades; the blades LTC-11 lists (J6523A-24, J6487A-24, K6523A-24, 6547A-6) are not numbered in those series, so it does not reach the LTC-11 installations as listed.Applies to All 6800, 6900, and 7000 Series Externally Surface-Treated Aluminum Alloy Blades (Airfoil Shotpeened and/or Shank Rolled, Including Nickel-Plated Blades).drs/AD-58-22-01-verbatim.txt | Airworthiness Directive 58-22-01, Hamilton Standard 6800, 6900 and 7000 series externally surface-treated aluminum alloy bladesApplicability · amendment and effective date not printed in the DRS text · accessed 2026-10-03 | ●Primary source | FAA AD 58-22-01 (DRS text); LTC-11 Rev 5 (FAA, 18 Nov 2009) | pending |
C-X2b-037 | family | AD 58-22-01 compliance is due at the first blade overhaul after January 1, 1959 and every overhaul thereafter (face alignment records per Service Bulletin 546).Compliance required at first blade overhaul after January 1, 1959, and at every overhaul thereafter.drs/AD-58-22-01-verbatim.txt | Airworthiness Directive 58-22-01, Hamilton Standard 6800, 6900 and 7000 series externally surface-treated aluminum alloy bladesCompliance · amendment and effective date not printed in the DRS text · accessed 2026-10-03 | ●Primary source | FAA AD 58-22-01 (DRS text) | pending |